As soon as the summer season arrives, the demand for cooler and AC intensifies. But there is no relief every time. Often people complain that their cooler has started throwing hot air instead of cold air. Is the cooler really deteriorated or is we making any mistake? In this article we Cooler tips Through how you can increase your cooler’s cooling capacity and get rid of hot air.
If you place your cooler on the window or in a place where there is direct sunlight, it gets hot quickly and then starts throwing hot air. Cooler tips According to, the cooler should always be kept in the shade place so that his body and internal parts are not too hot.
If your room is completely closed and the hot air of the cooler is unable to get out, then that air rotates in the room and produces even more heat. So always make sure that the room has an exhaust or an open window on the other side, so that the wind flows.
The cooler’s cooler’s cooling capacity depends entirely on its water system. If the water tank is less water or the flow is stopped, the cooling pads remain dry and then the fan throws hot air. Cooler tips It is said that always maintain the water level to the prescribed extent.
If you want more cool, add some ice to the water. This will cool cooling pads rapidly and will also reduce the air temperature. It is an easy but effective trick during summer.
If the dust or dirt accumulates on the cooler’s cooler’s cooler pads, motor and fan, the cooler is unable to cool the air correctly. Especially old cooling pads prevent air flow. Cooler tips According to, cleaning of cooling pads and fans is necessary every 7-10 days.
If the pads have become more old, torn or their thickness is reduced, then it would be better to replace them. This investment can make your summer comfortable.
There is an old but extremely effective technique – pouring pieces of clay pot into the cooler’s water tank. The soil quickly cools and keeps the water cool. Cooler tips According to this, this can increase the coolness of your cooler manifold.
The cooler’s motor and fans become warm due to friction due to frequent walking. It is important to oyaling in these parts from time to time so that it can walk smooth and do not throw hot air.
Putting the cooler on the dirty or bumpy floor increases vibration, which can increase both voice and hot air. Putting on a clean and flat surface does not cause this problem.
The cooler that throw hot air is not always bad, but it is important to pay attention to the basic things like cleaning, positioning and water flow. given the above Cooler tips By adopting, you can make your cooler again cool and get relief in this hot heat.
