Balloon Irrigation Hack: In today's scorching heat, it becomes very difficult to water the plants in the morning and evening. In such a situation, most people install water dripping system in their house, which is quite expensive. But today we will tell you an easy and cheap DIY hack, by which you can water plants with the help of a balloon. This method is especially useful when it is very hot or you are going out of the house.
by balloon water dripping system To make for plants, first take a normal size balloon. Fill it with water. After filling with water, tie it well, so that water does not come out from anywhere. Now make a couple of holes in the balloon with the help of a fine needle or pin. Keep in mind that these should not be too big otherwise the water will drain quickly. Now place the balloon on the soil of the plant pot or press it lightly into the soil. When you place it in a pot, water slowly drips from the small holes of the balloon. This provides constant moisture to the plants. Just like the way a drip irrigation system works. You can do this method for small or medium sized plants. Due to this, the plants will not get damaged even in summer and they will continue to get water gradually.

Read more- Old Mug Planter DIY: There is a hidden bug of creativity, so make a cute planter from old bathroom mug.
Keep in mind- Do not make too big holes in the balloon and choose the size of the balloon according to the size of the plants. If the plant is very big then keep a medium sized balloon in it and if the plant is small then keep only a small sized balloon in it. Also keep checking from time to time whether water is coming out in the right quantity or not. By adopting this easy trick, you can keep your trees and plants green and prevent them from drying up.