Tezzbuzz Desk- Cooler is considered to be the cheapest and effective means of relief for people in summer. But even a small carelessness while using the cooler can cause big problems. Some common mistakes, especially while filling water in the cooler, can pose a threat to both health and safety. Many times, due to these mistakes, the risk of spreading infection increases, and serious incidents like electric shock can also occur.
Often people do not change the water in the cooler for several days. Stagnant water for a long time becomes a breeding ground for bacteria, fungus and mosquitoes. This may increase the risk of dengue, malaria and other infections. Therefore it is important to change the cooler water regularly.
Moss, dust and dirt accumulate in the cooler tank over time. If not cleaned, it can cause contaminated air. According to experts, the tank and pad of the cooler should be thoroughly cleaned at least once a week.
Many people fill water in the cooler while it is still running to save time. This habit can prove to be very dangerous. The risk of electric shock increases when there is contact with water and electricity. Therefore always fill water only after turning off the cooler and removing the plug.
Cooler pads retain dust and moisture inside them for a long time. If these are not cleaned or replaced periodically, bacteria and allergy-causing particles can spread through the room through the air. It is best to regularly check and clean the pads during the season.
If you feel a shock or electric shock while touching the cooler, then immediately unplug it. After this, empty the water from the tank and get the wiring, motor and other electrical parts checked. Especially such problem is seen more in iron coolers.
As much as a cooler provides relief in summers, its proper care is equally important. A little caution can save you from electrocution, infection and other health hazards.
