Rusted iron items, old tools or small iron items in the house often get rusted and start looking bad. In such a situation, there is no need to buy expensive rust remover every time. If you have potato peels and baking soda in your house, then with the help of these two you can prepare an easy and effective cleaning paste. The natural elements present in potato peels and the cleaning abilities of baking soda combine to help remove light rust stains and dirt. However, it may have less effect on very old or deep rust.

Why are potato peels and baking soda effective?

Potato peels contain natural starch and mild acidic elements, while baking soda is a mild abrasive cleaner. Together they help loosen dirt and light rust on the base, making cleaning easier.

Make powerful cleaning paste like this

First of all, wash fresh potato peels thoroughly and grind them finely. Now add one to two spoons of baking soda in it and prepare a thick paste by adding some water as per requirement. This paste is ready to use.

How to use it on rusty things?

Apply the prepared paste thoroughly on the rusty metal surface and leave it for about 20 to 30 minutes. After this, rub it gently with a scrubber or old toothbrush and wash it with clean water and dry it thoroughly. The process can be repeated again if necessary.

On which things to do it and on which not to do it?

This home remedy can be used on small iron tools, iron pans, garden tools, screws, bolts and lightly rusted metal items. But before using it on aluminium, polished metal, non-stick base or precious metal, it would be better to test it on a small area.

Take these precautions for best results

After applying the paste, it is important to dry the metal thoroughly so that it does not rust again. Very deep or long standing rust may require commercial rust remover or cleaning. Wear gloves while cleaning so that your hands do not become dry.

FAQ

Q1. Does potato peels and baking soda remove rust completely?

This method is helpful in removing light and early rust stains, but its effect on deeper rust may be limited.

Q2. How long should you leave this paste on?

Leave the paste on for about 20 to 30 minutes, then clean it gently with a brush or scrubber.

Q3. Can it be used on all metals?

No, it is better to test a small area first on a polished base, aluminum, non-stick or precious metals.

Read this also- Leave market perfumes, make chemical-free fragrance with Madhumalati flowers in minutes.