New Delhi: In today’s time, refrigerator has become one of the most important machines in every home. From keeping water cool to keeping milk, fruits, vegetables and leftover food safe, it works continuously day and night. But most people pay attention only to its external cleaning, whereas the real need is to clean its cooling system.
This carelessness gradually starts affecting the performance of the fridge. Many times the refrigerator starts getting excessively hot, cooling reduces and electricity consumption also increases. According to experts, the biggest reason for this could be the dust and dirt accumulated on the condenser coils.
In old refrigerators, the mesh-like coils at the back were easily visible. Their job is to take out the heat generated inside the refrigerator. But with time, dust, soil and grease start accumulating on these coils. When the coils become dirty, heat cannot escape properly. Due to this, the cooling of the refrigerator may become weak and additional pressure starts coming on the compressor.
Fridge cooling may be reduced
Electricity bill may increase rapidly
too much pressure on the compressor
The fridge may get too hot
Machine life may be reduced
Easy tips to keep the cooling of the fridge better
Regular cleaning is considered very important to maintain good performance of the refrigerator. For this, keeping some simple things in mind can be very beneficial.
Always unplug the refrigerator before cleaning
Clean the dust behind with a soft brush
Use a vacuum cleaner if necessary
Do not place the blower too close
Place the refrigerator slightly away from the wall to maintain airflow
Step 1: First remove the plug
Before starting cleaning, disconnect the refrigerator from electricity, so that there is no danger.
Step 2: Move the fridge a little further
To easily access the coils behind the fridge, move it away from the wall.
Step 3: Remove dust with a soft brush
Gently clean the thick dust and hair stuck on the coils.
Step 4: Do deep cleaning with vacuum cleaner
Remove dust trapped between the coils with the help of the brush attachment.
Step 5: Remove stubborn dirt
If necessary, a toothbrush or paint brush can be used. Light air blow can also be helpful.
Step 6: Clean the surrounding area also
It is also important to remove the dust accumulated on the rear floor and wall, so that the air flow remains correct.
Step 7: Put the refrigerator back on
After cleaning is complete, place the refrigerator in its place and plug it on.
In today’s double door and frost-free refrigerators, the coils are often fitted inside or below the body. In such a situation, it is not easy to reach the coils directly. In these modern fridges, cleaning of the ventilation area and airflow section is mainly considered important. It is enough to clean the ventilation grill at the bottom with a brush or vacuum cleaner.
If your fridge is constantly getting too hot, is not providing the same amount of cooling as before, the compressor is running continuously or strange sounds are coming, then it is better to get it serviced by a technician immediately.
Keep these things in mind while cleaning
Do not rub the coils hard
Do not pour water directly on the coils
If you have pets, clean frequently
Use vacuum or blower with caution
Just 15 minutes of cleaning can give big benefits
According to experts, regular cleaning of just 10 to 15 minutes can improve the cooling of the refrigerator. This can reduce electricity consumption and also increase the life of the refrigerator. Ultimately, whether it is an old refrigerator or a new modern refrigerator, it is considered very important to maintain cleanliness around its cooling system. With the help of regular maintenance and proper ventilation, the refrigerator can provide better cooling for a long time and the electricity bill can also be kept under control.
