Proper use of room heater in winter: Save money and trouble
Is your room heater breaking down again and again? Know why!
5 easy ways to increase the life of room heater
Do not make these mistakes while using room heater
Why does the rod of room heater break again and again? Know the solution
Stabilizer and brakes: keep the room heater safe
How to use room heater properly in cold?

In this cold season of winter, many areas are experiencing severe cold and snowfall. In such a situation, people use room heaters to get relief from cold. This device helps in heating the room, but with constant and incorrect use, its rod can quickly deteriorate. You may have to spend extra to get it repaired.

Why does the rod of room heater break again and again?

1. Running continuously for a long time
Running the room heater continuously for several hours puts more pressure on the rod, which can cause it to get damaged quickly.

What to do?

After the room gets warm, turn off the room heater.
Do not run the room heater for more than one and a half to two hours.
Take a break of 15-20 minutes before using it again.
2. Use when room heater gets too hot
If the room heater has become too hot, restarting it without cooling it down may damage the rod.

What to do?

Allow the heater to cool for at least 15-20 minutes.
Only after that turn it on again.
3. Water contact
Water getting into the room heater can damage the rod.

What to do?

Keep the heater in a dry and safe place.
Be careful while operating the room heater and do not use it in a wet place.
Do not keep flammable materials such as clothes, paper or wood near the heater.
4. Effect of power fluctuations
Voltage problems can affect the rod, causing it to fail.

What to do?

If there is a voltage problem in your area, use a stabilizer.

“Don't consider constipation as a minor problem, avoid its serious effects!”